Launcher XL Driver
-
Regular Price
-
$529.99
-
Sale Price
-
$529.99
-
Regular Price
-
Sold Out
-
Unit Price
- per
- Regular Price
- $529.99
- Sale Price
- $529.99
- Regular Price
- Unit Price
- per
It’s called the XL Driver for a reason. Mainly because it’s really big and so is the sweet spot. That makes it extremely forgiving. We packed the XL Driver with MOI for towering drives that fly straight.
Due to high demand, if we are sold out online in the option you are seeking, you may also find the XL line at these retailers.
- Variant: Right Hand / 9.0 / Regular
- SKU: 30906
- In Stock: 21
- Weight: 0.0 kg
- Product Type: Drivers
- Brand: Cleveland Golf Canada
In Depth
XL DRIVER
This driver is big - like, really big - so it's easy to send drives right down the middle. With the most MOI ever in a Cleveland Golf driver, Launcher XL will have you thinking less about the club in your hands and more about carrying bunkers, clearing hazards, and finding the fairway.
TECHNOLOGY
XL HEAD DESIGN
This is huge: a bigger head means an MOI of 5,200 g-cm2 – our most ever in a Cleveland Golf driver. Add that forgiveness to a high launch from low-and-deep weighting, and you’ll enjoy maximum distance with maximum fun.
REBOUND FRAME
What’s better than one flex zone? Two (duh). Alternating zones of flexibility and rigidity direct more energy into the golf ball for increased ball speed and distance on every shot.
ACTION MASS CB
An 8g weight placed inside the end of the grip delivers better balance for more control without extra effort.
ADJUSTABLE HOSEL
Adjust your loft from 9 to 12 degrees to optimize your launch angle, distance, and shot shape. Loft can be adjusted at 0.5 deg increments with 12 positions in all.
ACCURACY BUILD
If precision is your top priority, this custom configuration is an inch shorter without counterbalancing for max control off the tee.
LAUNCHER XL DRIVER SPECS
*Accuracy build is a featured, preconfigured custom option for players who seek maximum control. Head/shaft/grip are the same, but length is 1” shorter and 8g grip weight is excluded.
PROJECT X CYPHER 50 SHAFT
TIP DIAMETER: 0.335''
WEIGHT(g): 52(A), 54(R), 56(S)
LAUNCH: MID-HIGH
SPIN: MID-HIGH
FLEX: 5.0-A, 5.5-R, 6.0-S
GOLF PRIDE TOUR VELVET 360
INSIDE DIAMETER: 58 ROUND
WEIGHT(g): 52g
HOSEL SLEEVE ADJUSTABILITY GUIDE
The Launcher XL Driver comes standard with an adjustable hosel sleeve that adjusts from 9.0° to 12.0° in 0.5° increments. In all, there’s 12 different positions which means you’re bound to find the perfect setup for your swing.
The 4 primary loft settings are marked on the sleeve at 9.0°, 10.5°, 12.0° and 10.5° Flat. The varying settings between each are visible on the pre-installed shaft tip.
BALL LAUNCHING TOO LOW?
INCREASE LOFT UP TO 12 DEGREES.
BALL LAUNCHING TOO HIGH?
LOWER LOFT DOWN TO 9 DEGREES.
HOW TO REMOVE AND INSTALL QTS SLEEVE (TORQUE WRENCH OPERATION)
Hold the club upright with the grip resting on the ground.
Use this position when loosening and tightening.
Supporting the head in your hand, gently insert the torque wrench into the screw hole.
Shaft and torque wrench should form a straight line
Loosen
With the torque wrench aligned with the shaft, turn it counterclockwise.
Tighten
With the torque wrench aligned with the shaft, turn it counterclockwise.
*Always tighten until you hear a 'click'. Failure to do so may result in separation of the club head or product damage.